The Marchetti CW 25.35 Sherpina is an extremely compact telescopic crawler crane. Its total weight (including ballast) of only 25 tons and the low transport mass (length 7.1 m, width 2.5 m, allow cost-effective logistics without special equipment.
The Sherpina belongs to the 25-ton payload class, has a 5-part telescopic boom with a length of 25.1 meters (with JIB up to 33.2 m long) and can extend its undercarriage hydraulically from 2.5 m to 3.9 m wide. The boom can be telescoped under (partial) load and it can travel under load. The various attachments optionally available make this crane a true all-rounder.
The engine is available with 129 kW rated power, both in EU 97/68 stage 3a and stage 5 variants.
Marchetti telescopic crawler crane CW 65.40
The Marchetti CW 65.40 is a full telescopic crawler crane in the 65 ton class. It is equipped with 14.5 tons of variable ballast and has a 40-meter boom divided into 5 sections. The system length can be extended to 54.5 meters using the optional lattice boom extension.
Marchtetti telescopic crawler crane CW 45.32
The Marchetti CW 45.32 is a compact telescopic crawler crane in the 45 ton class. Without ballast (10 t), its total weight is only 31 t with transport masses of less than 12 m long and less than 3 m wide.
This telescopic crawler crane has a main boom 32 m long (divided into 4 sections). With the optionally available lattice boom extension (JIB), the system length can be extended to 46.5 m.
This unit is also available in both EU 97/68 stage 3a and stage 5 versions.
Marchetti telescopic crawler crane CW 70.42 L (Sherpa)
The Marchetti CW 70.42 rounds off the top of the Marchetti telescopic crawler crane range. This is a crawler crane in the 70 ton class.
As a special feature, this crawler crane offers the possibility of using additional insertable outriggers if required. These increase the crane's tilt stability by more than 200%.
The CW 70.42 has a main boom of 42 meters in length, divided into 5 sections. The boom can be extended to 56.5 meters with the optional lattice boom extension.
This crane is suitable for heavy-duty operations in rough terrain. It has proven its reliability for several years in daily use in Africa and Australia.
Marchetti telescopic crawler crane CW 55.40
The Marchetti CW 55.40 is a compromise between performance and mobility. As a crane in the 45-ton class, it optimally complements the Marchetti telescopic crawler crane model range.
Apart from the ballast, the CW 55.40 is identical in construction to the CW 65.40 and the superstructure of the MTK 60 or MTK 60-5. It has a main boom of 40 meters divided into 5 sections. The system length can be extended to 54.5 meters with the use of the optional lattice boom extension (JIB).
Commercial Truck Chassis.
Marchetti provides the Integration into customer’s existing vehicle fleet, as brand can be freely selected by customer. The Mature series technology and comprehensive service network reaches Up to 80% reduction in maintenance and operating costs compared to AT or mobile crane (because the costs are incurred in the undercarriage!
Surface-Mounted Telescopic Crane.
Highest precision when lifting loads thanks to stable telescopic boom - Fast and efficient work (compared to loading crane) combined with High lifting capacities
Different Models – The Right One For Every Need.
The MTK series offers a choice of six model variants, three of which have conventional telescopic technology and the boom is guided to the front, above the cab (MTK 40, MTK 60 and MTK 60-5). The three other model variants, MTK 1005, 1006 and 180, have very strong but short booms that are guided to the rear when in transport mode.