Kategorie: Buyer-checklist

  • Heim
  • Kategorie: Buyer-checklist
Overhauling
29. Juni 2021

On the basis of the test report, a decision is made as to which investments are to be made in the used crane. Qualified specialist personnel eliminate any existing defects or carry out maintenance work. A detailed report is prepared on the scope of the overhaul and maintenance work as well as any spare parts used.

Mehr erfahren

Repainting
29. Juni 2021

Our specialist workshop also has the possibility of professionally painting a used crane. After thorough cleaning, the crane is prepared for painting. Basically, we apply a filling primer and seal all sheet metal and body parts with an approx. 1-2 mm thick underbody or stone chip protective layer. Afterwards we paint 2x with top coat in passenger car brand quality, on request in your company colour and with your lettering or logos.

Mehr erfahren

Inspection & test
29. Juni 2021

After overhauling or maintenance and, if necessary, painting, the used crane is tested in practical operation on our test site and prepared for subsequent acceptance by the expert. We specifically test the brakes and the load torque limitation under load and run through all setup states and boom configurations of the crane. This ensures that the software works troublefree, that all sensors function properly and that the hydraulic lines are tight.

Mehr erfahren

TÜV / DEKRA acceptance test
29. Juni 2021

After the used crane has been overhauled, adjusted and successfully tested by us, the inspection and acceptance of the crane vehicle is carried out by an independent TÜV or DEKRA expert or a crane expert authorised by the trade association (UVV).

Mehr erfahren

Delivery service & crane driver training
29. Juni 2021

Within the scope of delivery of the used crane to the customer, any special requests will be realised. For example, the used crane is specially prepared for use in cold or hot regions or special spare parts packages are put together. The new crane operator also receives technical instruction. This can take place on site or at the customer and usually takes 1 to 2 working days.

Mehr erfahren

Worldwide spare parts supply
29. Juni 2021

We supply spare parts for the crane purchased from us, regardless of make or year of manufacture, worldwide. Due to our specialization we can name the necessary parts to you and usually also procure at short notice as well as coordinate the supply abroad if necessary. On request, we can also put together a spare parts package for you. This guarantees the operational readiness of your used crane even in the remotest areas of the world.

Mehr erfahren

Transport & Shipping
29. Juni 2021

We will take care of the entire transport process for you or the export/import of your used crane, from obtaining the necessary travel permits from us to the seaport, to obtaining the necessary documents for customs and shipping to the request for quotations for shipping to the destination of your choice.

Mehr erfahren

 

 / 

anmelden

Nachricht senden

Meine Favoriten