The Marchetti MTK40 is a 40-ton (t) class telescopic crane. It has a 4-part telescopic boom with a total length of 32 meters (m). The maximum length of the system can be extended to 46.5 meters (m) with the optional grid extension (JIB).
The Marchetti Sherpina CW 25.35 is an extremely compact telescopic crawler crane. It belongs to the 25 ton (t) class and has a 5-part telescopic boom set with a total length of 25.1 meters (m). The boom length can also be adjusted under partial load and the maximum length of the system can be extended to up to 33.2 m with the optional grid attachment (JIB).
We are specialists for mobile cranes. Since we work independently of manufacturers, we always offer our customers a first-class, objective and professional advice. Describe your specific …
The used crane delivered to us is subjected to an incoming inspection in our specialist workshop, which includes more than 130 inspection points.The result of …
On the basis of the test report, a decision is made as to which investments are to be made in the used crane. Qualified specialist personnel eliminate any existing defects or carry out maintenance work. A detailed report is prepared on the scope of the overhaul and maintenance work as well as any spare parts used.
Our specialist workshop also has the possibility of professionally painting a used crane. After thorough cleaning, the crane is prepared for painting. Basically, we apply a filling primer and seal all sheet metal and body parts with an approx. 1-2mm thick underbody or stone chip protective layer. Afterwards we paint 2x with top coat in passenger car brand quality, on request in your company color and with your lettering or logos.
After overhauling or maintenance and, if necessary, painting, the used crane is tested in practical operation on our test site and prepared for subsequent acceptance by the expert. We specifically test the brakes and the load torque limitation under load and run through all setup states and boom configurations of the crane. This ensures that the software works trouble-free, that all sensors function properly and that the hydraulic lines are tight.
After the used crane has been overhauled, adjusted and successfully tested by us, the inspection and acceptance of the crane vehicle is carried out by an independent TÜV or DEKRA expert or a crane expert authorized by the trade association (UVV).
Within the scope of delivery of the used crane to the customer, any special requests will be realised. For example, the used crane is specially prepared for use in cold or hot regions or special spare parts packages are put together. The new crane operator also receives technical instructions. This can take place on site or at the customer and usually takes 1 to 2 working days.
We guarantee our clients a quality customer service. For all crane vehicles supplied by us on your construction sites at home as well as abroad!Accordingly, …