Marchetti mobile cranes.

wide range of sage. Simply clever.

The Marchetti Concept

Use of a commercial truck chassis on which a conventional telescopic crane is mounted.

Marchetti MTK 40

The Marchetti MTK 40 combines a commercial truck chassis with a 40 ton class telescopic crane.

The superstructure has a 4-section telescopic boom with a total length of 32 meters. The maximum length of the system can be extended to 46.5 meters with the optional extension (JIB).

The „little brother“ of the Marchetti MTK60 is powered by the engine of the chassis as an auxiliary device, as it does not have its own crane engine. This allows a maximum total weight of 27 tons or 32 tons.

The required outrigger base is 6 mx 6.2 m with the outriggers fully extended. With the booms only 50% extended, it is 3 mx 3.1 m. This means that this unit can be placed much closer than a loader crane to the location of the load to be lifted. The result is higher payloads compared to a loader crane, with less movement at the boom.

In Germany, the MTK40 is offered on a standard 3-axle truck chassis. In Switzerland, it is necessary to use a 4-axle chassis due to regulatory requirements.

When selecting the truck chassis, several variants are available to the customer. The vehicle can thus be optimally integrated into an existing fleet. Maintenance and operating costs are kept low because a proven truck chassis is used.

The telescopic crane lifts your loads with the highest precision thanks to a real telescopic boom. The unit can be moved very quickly and cost-efficiently (like a truck) and is ready for use on the construction site. Thus, the Marchetti MTK40 represents the perfect cab crane.

Marchetti MTK60

The Marchetti MTK 60 combines a commercial truck chassis with a 60 ton class telescopic crane.

The superstructure has a 5-section telescopic boom with a total length of 40 meters. The maximum length of the system can be extended to 54.5 meters with the optional extension (JIB).

On the big brother of the Marchetti MTK 40, the truck chassis and superstructure are only mechanically connected. Accordingly, the superstructure has a separate engine, which is optimally matched to the load of the crane operation and thus works very efficiently (low fuel consumption, low emissions).

The required support base is 7.1 mx 7.35 m with the outriggers fully extended. With the booms only 50% extended, it is 3.5 mx 3.7 m. This allows this unit to be placed much closer than a loader crane to the location of the load to be lifted. The result is higher payloads compared to a loader crane, with less movement at the boom.

In Germany, the MTK 60 is offered on a 4-axle truck chassis. In Switzerland, it is necessary to use a 5-axle chassis due to regulatory requirements (permissible total weight) (see MTK 60-5 or swissedition).

When choosing the truck chassis, several variants are available to the customer. The vehicle can thus be optimally integrated into an existing fleet. Maintenance and operating costs are kept low because a standard truck chassis is used (low-cost maintenance, low-cost spare parts, very low wear and tear or designed for high mileage).

The telescopic crane lifts your loads with the highest precision thanks to a real telescopic boom. The equipment can be moved very quickly and cost-efficiently (like a truck) and is ready for use on the construction site. Thus, the Marchetti MTK 60 represents the perfect cab crane.

Marchetti MTK 60-5 (swiss edition)

The Marchetti MTK 60-5 is identical in construction to the MTK 60 (see above). For legal reasons (permissible gross weight), the MTK 60 must be mounted on a 5-axle truck chassis in Switzerland.

However, this also opens up new possibilities in terms of ballasting and, related to this, the performance of the crane:

The Marchetti MTK 60-5 is equipped with 11 tons of ballast and the full ballast can be moved on the crane HVF-free. Thus, there is no need for cumbersome reloading or carrying a trailer for the ballast; With 11 tons of ballast, the crane achieves load capacity values over long distances that elevate it to a crane in the 70-ton category.

This makes the Machetti MTK 60-5 a very strong and extremely nimble mobile crane that more than deserves the qualification „cab crane“.

Why Marchetti?

01.

Commercial truck chassis

Marchetti provides the Integration into customer’s existing vehicle fleet, as brand can be freely selected by customer. The Mature series technology and comprehensive service network reaches Up to 80% reduction in maintenance and operating costs compared to AT or mobile crane (because the costs are incurred in the undercarriage!

02.

Surface mounted telescopic crane

Highest precision when lifting loads thanks to stable telescopic boom - Fast and efficient work (compared to loading crane) combined with High lifting capacities

03.

Different models – the right one for every need

The MTK series offers a choice of six model variants, three of which have conventional telescopic technology and the boom is guided to the front, above the cab (MTK 40, MTK 60 and MTK 60-5). The three other model variants, MTK 1005, 1006 and 180, have very strong but short booms that are guided to the rear when in transport mode.

The Marchetti Fleat

You can download the latest brochure here

 

 / 

Sign in

Send Message

My favorites