The Marchetti Sherpina CW 25.35 is an extremely compact telescopic crawler crane. It belongs to the 25 ton (t) class and has a 5-part telescopic boom set with a total length of 25.1 meters (m). The boom length can also be adjusted under partial load and the maximum length of the system can be extended to up to 33.2 m with the optional grid attachment (JIB).
On the basis of the test report, a decision is made as to which investments are to be made in the used crane. Qualified specialist personnel eliminate any existing defects or carry out maintenance work. A detailed report is prepared on the scope of the overhaul and maintenance work as well as any spare parts used.
Our specialist workshop also has the possibility of professionally painting a used crane. After thorough cleaning, the crane is prepared for painting. Basically, we apply a filling primer and seal all sheet metal and body parts with an approx. 1-2 mm thick underbody or stone chip protective layer. Afterwards we paint 2x with top coat in passenger car brand quality, on request in your company colour and with your lettering or logos.
After overhauling or maintenance and, if necessary, painting, the used crane is tested in practical operation on our test site and prepared for subsequent acceptance by the expert. We specifically test the brakes and the load torque limitation under load and run through all setup states and boom configurations of the crane. This ensures that the software works troublefree, that all sensors function properly and that the hydraulic lines are tight.
Within the scope of delivery of the used crane to the customer, any special requests will be realised. For example, the used crane is specially prepared for use in cold or hot regions or special spare parts packages are put together. The new crane operator also receives technical instruction. This can take place on site or at the customer and usually takes 1 to 2 working days.